Product Questions
Can the canopy lights on my golf cart kit be dimmed and controlled independently from the underbody lights?
Yes—when using the Bluetooth-controlled Golf Cart Kit, the canopy (interior) lights can be controlled independently from the underbody lights. The smartphone app allows you to:. Control each lighting zone separately (underbody, wheel wells, and inter
Can I add more canopy lights to my golf cart if my existing junction box is full, and are additional canopy light kits available for purchase?
If your junction box is full, you cannot exceed the maximum of four canopy/interior lights on a single control box. However, the great news is that canopy add-on kits and replacement canopy lights are available for purchase if you do not have them. Y
How do I control Single Color LED Golf Cart Underbody Lights?
Single Color LED Golf Cart Underbody Lights are controlled using a single color control box paired with a keyfob remote. This setup allows you to turn the lights on or off and activate flashing patterns. Need a replacement? You can find the control b
Can I upgrade the control box later to support multi-color if I buy a Single Color Golf Cart Kit?
No, the single color control box is not upgradable to support multi-color lighting. To access multi-color features, you need to purchase one of our Multicolor Golf Cart LED Light Kits. You can explore available options here: 👉 Multi-Color Golf Cart
What is the maximum voltage the reducer can handle?
The Golf Cart Battery Voltage Reducer is rated to safely operate with input voltages up to 72 volts. View product details here for more information: 👉 Golf Cart Battery Voltage Reducer – LEDGlow
What powertrain option do I need for a 12V connection in my golf cart?
All of our Golf Cart LED Lighting Kits are compatible with a 12-volt power source, regardless of your golf cart’s powertrain (electric or gas). No special configuration is required for 12V setups. If you have an electric golf cart rated over 12 volts
What size kit do I need for my bike, and will I need extensions for installation?
Kit size and the need for extensions depend on your bike’s layout and lighting goals. Consider the following:. Wire Length: Each LED strip includes 1.5 feet of wire. If your mounting points are farther from the control box, extension cables may be ne
How long is the wiring attached to each strip?
Each LED strip includes 1.5 feet of wire pre-attached for easy installation and connection to the control box or other strips. If additional length is needed, Motorcycle LED Extension Cables are available to help with longer runs.
Can the LED kit slowly fade through all colors, but then turn red and stay red when the brake is applied?
Yes. With our Bluetooth-controlled LED kits, you can set the lights to fade smoothly through all colors and switch to a steady red when the brake is applied. To enable this, simply connect the blue wire from the control box to your brake light wire.
Will adding extra strips to my Bluetooth Advanced Million Color Kit require a fuse upgrade?
No. The Bluetooth Advanced Million Color Kit comes with an ample fuse rated to safely support up to 1,000 LEDs without requiring an upgrade. Even if you change the fuse, the system’s maximum LED count remains limited to 1,000 for optimal performance
Is there a way to keep one zone of my LEDGlow lights active while turning off another zone?
Not at this time. Current LEDGlow lighting systems do not support independently turning zones on or off while keeping others active. Zones are controlled collectively based on preset modes and settings.
If I buy a 30-piece Motorcycle Lighting Kit, can I expand it later?
Yes. You can expand a 30-piece motorcycle kit by upgrading to a higher-capacity control box. Options include:. 600 Control Box: Supports up to 600 LEDs. Bluetooth Control Box: Supports up to 1,000 LEDs and offers Smartphone Control. These control box
What is the maximum number of strips or LEDs I can install on my bike?
The maximum number depends on your control box and the size of your LED strips:. Standard Control Box: Supports up to 250 LEDs. Upgraded Control Box: Supports up to 600 LEDs. For assistance or more information, please Contact Us
Are lower DRL or turn signal lights available for motorcycles?
No, we do not currently offer lower Daytime Running Lights (DRLs) or turn signal lights for motorcycles.
Do LiteTrike® Advanced Million Color Lighting Kits include Wheel Well Lights?
Wheel Well Lights are included with our LiteTrike® III Advanced Million Color Kit. The other LiteTrike® Kits do not currently include this feature. However, you can add Wheel Well Lights to your setup using our Replacement Strip for Advanced Million
Which lighting kits feature Dual Zone Control?
Dual Zone Control is available for all motorcycle lighting kits with a Bluetooth control box.
What are the differences between the Advanced and Flexible Million Color LED ATV Lighting Kits?
We offer two types of ATV Lighting Kits, both featuring vibrant colors and dynamic lighting effects:. Advanced Million Color LED ATV Lighting Kit. 15 Solid Color Modes: Blue, Red, Green, Pink, Purple, Teal, Orange, Aqua, Yellow, Light Pink, Light Gre
How do I set my motorcycle lighting to stay on one color using the key fob?
For non-Bluetooth Motorcycle Lighting Kits: Press the A button on the key fob to cycle through the Solid Color Modes. Stop on your desired color, and the kit will remain on that color until changed. For Bluetooth Kits: Use the A button to set the col
Which LED Underbody Lighting Kit is best for my vehicle — a Truck Kit or a Car Kit?
It depends on your vehicle type and how much lighting coverage you want. Truck Underbody Kits are designed for larger vehicles and include:. (2) 30–36” tubes for the front and rear. (2) 46–48” tubes for the sides. (2) 24” tubes for additional side co
Where can I find the lighting patterns for my installed Underbody LED Kit?
Lighting patterns are typically listed in the user manual included with your kit. If you no longer have the manual, you can find product-specific information and pattern guides on our website, located in the Instructions section.
What holds the tubes in place after installation?
The tubes are secured using one or more of the following methods, depending on the type of underbody kit:. Mounting brackets that go over and around the tubes. Screws for the lighting tubes with integrated mounting points at each end. Double-sided ta
How can I make my Underbody LED Lights automatically return to a saved setting when I start my car?
To have your Underbody LED Kit return to a saved setting each time you start your vehicle, follow these steps:. Connect to a 12V constant power source – This ensures the control box retains memory even when the vehicle is turned off. Set your desired
Are LEDGlow lighting Kits waterproof and safe for use in wet conditions, such as car washes or boat trailers?
Our lighting kits feature varying levels of water resistance:. Light tubes are water-resistant and safe for exposure to rain, road spray, and car washes. However, they are not designed for full submersion and should not be used in applications like b
Do you sell replacement remotes or key fobs, and where can I purchase one if needed?
Yes, we offer a variety of replacement remotes and key fobs. Availability depends on your kit’s model and age. You can purchase replacements directly from our website at: LEDGlow. Please note that some key fobs may require programming to sync with yo
Do you offer replacement tubes or connectors for your Lighting Kits?
Yes, we offer replacement tubes for LEDGlow Bluetooth Underbody and additional lighting kits. However, replacement connectors for the cables are not available. For assistance and to order replacement tubes, please visit our replacement parts page:Rep
What distinguishes an LEDGlow Truck Underbody Kit from a Car Underbody Kit?
The main difference is that a Truck Underbody Kit usually includes additional 24” tubes for the sides to better fit larger vehicles. Car Underbody Kits do not include these extra side tubes, as they are designed for standard passenger vehicles.
What color options are available for LEDGlow Single Color Underbody Kits?
We offer single-color kits in our Flexible Slimline Series. These kits come in a wide variety of vibrant colors to match your style and preferences, including classic colors like red, green, and blue, as well as unique shades like purple, orange, pin
What Differentiates the Standard Wireless Underglow Kit from the Slimline Wireless Kit?
Tube Shape: Round. Connection Style: Daisy-chain with round connectors. Wire Length: 3 ft on both ends of each tube. Tube Type: Available in flexible and rigid options. Single Color Flexible tubes: 30” and 48” tubes. Million Color Flexible tubes: 30”
What additional components or modifications are required to install the Add-On Grille Light on my car?
To install the Add-On Grille Light, you’ll need one of our compatible underbody lighting kits. The add-on grille light itself does not include a control box or standalone controller—it is designed to connect directly to the junction cable of an exist
Can I control different sections of my LEDGlow lighting kit, set a multi-color kit to a single color, and use grille and engine bay lights together?
Yes, but only with our Bluetooth kits. LEDGlow Bluetooth-controlled kits enable independent control of various lighting zones, including wheel wells/wheel rings, engine bay/interior, and underbody lights. While individual LED tubes cannot be controll
How do I determine whether my kit is a Million Color Kit or a Single Color Kit?
You can identify your kit type by checking the connectors and control box features based on your vehicle type:. 🚗 Slimline Car or Truck Kits (Tubes):. Million Color Kit: Uses a 3- or 4-pin connector on the tubes. Single Color Kit: Uses a 2-pin conne
Can I buy the Display Module separately if I didn’t order it initially?
Yes, but only for our Bluetooth Car, Truck, and Golf Cart Kits. The Add-On Display Module with Music Mode is available for separate purchase and can be used to enhance your existing Bluetooth lighting setup.
Where can I purchase extensions for the various lights you offer?
Extensions for our lighting kits are available on our website:. Car Kit Extensions: Underbody Kit Upgrades. Interior Extensions: Add-On Interior Lighting Accessories. For further assistance, feel free to Contact Us and we’ll be happy to help!
Which expandable circuit is compatible with my vehicle?
To determine the correct expandable circuit for your vehicle, follow these steps:. Check the Fuse Guide: Refer to your vehicle’s fuse guide or owner’s manual to identify the fuse type and rating required. Contact the Manufacturer: Consult your vehicl
Does the Smartphone Controlled Kit include a wireless remote?
Only the Bluetooth Motorcycle Kit includes a wireless remote. The Bluetooth Underbody Kits for Cars, Trucks, and Golf Carts, as well as the Bluetooth Interior Kit, do not include a wireless remote and are controlled exclusively through smartphone app
What add-on options are available for the Bluetooth Underbody Kit?
The Bluetooth Underbody Kit is fully expandable with several plug-and-play add-ons, all controlled through the same smartphone app for seamless customization:. Grille Light Add-On: Adds a 24″ LED tube in the grille, synced with underbody lights. Whee
How does the Flexible Kit differ from other LEDGlow lighting kits?
The LEDGlow Flexible Kit offers a unique combination of flexibility, ease of installation, and vibrant illumination, distinguishing it from other underbody lighting options:. Flexible LED Strips: The Flexible Kit utilizes ultra-thin, flexible LED str
Are sound-activated modes available for your lighting kits?
Yes. Several LEDGlow lighting kits include Sound Activation (Music) Modes, allowing the lights to react to music or ambient sound. These modes are available for the following kits:. Bluetooth Kits with Display Module Add-On. Wireless Underbody Kits.
Can I adjust the brightness of the lighting kit?
Yes. Brightness adjustment is available on several LEDGlow lighting kits, allowing you to customize the intensity of your lights to suit your preference. Compatible kits include:. Bluetooth Underbody Kits. Single Color Slimline Kits. Bluetooth Golf C
What features and options are available for Single Color Wheel Well Kits?
Our Single Color Wheel Well Kits include the following features:. Available Colors: Choose from Red, Blue, Green, Orange, Purple, Pink, or White to match your vehicle’s style. Independent Control: Each kit includes its own control box, allowing for e
How do I control LEDGlow Million Color Wheel Ring or Wheel Well Lights?
You can control these lights using the following options:. Control Box with Remote: Easily adjust colors, effects, and lighting modes using the included wireless remote. Standalone Kit: Operates independently with its own dedicated control system. Ad
What is the length of the tubes and wire on Wheel Well Lighting Kits?
LEDGlow offers several Wheel Well Lighting Kit options, each with specific tube and wire lengths:. 🚗 Million Color Car & Truck Kits:. (4) 24” water-resistant flexible tubes. 13 feet of wire per tube for extended reach and easy installation. 🏎️ Sing
How do I choose the right Wheel Ring size for my vehicle?
To select the appropriate Wheel Ring size, please follow these guidelines:. Backing Plate: Ensure your vehicle has a backing plate for proper mounting of the wheel rings. Rotor and Caliper Diameter: Measure the outer diameter of your rotor and calipe
Are there Wheel Well or Wheel Ring Add-Ons available for the kit I bought?
Add-ons are available exclusively for Million Color Kits. We offer a variety of Wheel Well Lights and Wheel Rings in multiple sizes to fit different vehicle setups. These add-ons are compatible with Bluetooth, Wireless, and Slimline Underbody Kits. A
Is the Wheel Well Kit supplied with all the necessary components for installation?
Yes, our standalone Wheel Well Kit comes complete with everything you’ll need for installation, including:. Control Box with Keyfob. Junction Cable. Screws. Zip Ties. Installation Instructions. If you need any further assistance, please feel free to
Which Control Box is required to operate the Add-On Wheel Well or Wheel Ring Kit independently?
To operate your Add-On Wheel Well or Wheel Ring Kit independently, you will need the Replacement Control Box for Million Color Wheel Well Kits, which is available here:Replacement Control Box for Million Color Wheel Well Kits
What is the wire length on the Million Color Wheel Ring Light Kit?
Each wheel ring in the Million Color Wheel Ring Light Kit includes approximately 13 feet of pre-attached wiring per ring, allowing for flexible routing from each wheel location back to the control box. This length is designed to accommodate a wide ra
How bright are the LEDs on LEDGlow Wheel Ring/Wheel well Lighting Kits?
Our Wheel Ring/Wheel Well Lighting Kits use high-output 5050 SMD LEDs, engineered for maximum brightness and visibility. While exact lumen ratings are not listed, these LEDs deliver consistent, wide-angle illumination, which is ideal for both on-road
What’s the length of wire connecting each lighting pod in the Truck Bed Lighting Kit?
Each pod is connected by 2’ of wire, allowing flexible placement across the truck bed. The kit also includes 21’ of power wire to connect the system to your vehicle’s interior power source.
What features are included with LEDGlow Tailgate Light Bars?
LEDGlow Tailgate Light Bars include a combination of lighting features for enhanced safety and style—but not every model has every function. Here’s what to expect:. Standard features (on all models):All Tailgate Light Bars provide running lights, bra
How many batteries are required for LEDGlow remotes?
Battery requirements vary by remote style:. Red “A” Button Remote: Uses (1) 27A battery. Silver Button Remote: Uses (3) CR2016 batteries. Storefront/Home Theater Remote: Uses (1) CR2025 battery. 🔋 Replacement Batteries Are Available Here ›
Do you offer lighting kits that work with 24-volt systems?
Not at this time. Our lighting kits are engineered exclusively for use with 12-volt electrical systems and are not compatible with 24-volt configurations. If you have a 24V setup and need help with installation, please Contact Us for assistance.
What lighting modes and features are included in the Commercial Lighting Kit?
The Commercial Lighting Kit offers a wide range of lighting features for versatile customization, including:. 7 Solid Colors: White, Red, Green, Blue, Yellow, Purple and Teal. Dynamic Modes: Million Color Fade, Color Cycle, Color Scan, and Music Mode
Does the Tool Box Lighting Kit offer a multicolor option?
No, the Tool Box Lighting Kit is only available in a white LED configuration and does not offer multicolor functionality.
Do you offer LED accent lighting for the exterior of boats?
No, we currently offer interior lighting systems only for boats. For more information, please visit our Million Color LED Marine Boat Lighting Kit page.
Is an adhesion promoter required for the installation of LEDGlow Lighting Kits?
Adhesion promoter is not required, but it is optional and recommended. It can enhance the bond of the double-sided tape to certain surfaces—especially in areas with textured finishes, dust exposure, or extreme temperatures—for a more secure and lasti
What additional parts are required to install LEDGlow Tailgate Light Bars?
Each kit includes all essential components for a standard installation. However, depending on your vehicle setup, you may need the following additional accessories:. Adhesion Promoter – Recommended for better tape bonding on certain surfaces. Y-Split
Is the Truck Bed Lighting Kit compatible with long-bed trucks?
Yes, our Truck Bed Lighting Kit is compatible with long-bed trucks. It includes 2’ of wire between each lighting pod and 21’ of power wire, offering sufficient length for installation on most long-bed truck models.
How many color options do LEDGlow Lighting Kits offer?
LEDGlow kits offer a wide range of color options depending on the specific type of kit. Below is a breakdown of available colors by product:. Million Color Motorcycle Kit:Blue, Red, Green, Pink, Purple, Teal, Orange, Aqua, Yellow, Light Pink, Light G
Is it possible to operate the Million Color LED Commercial Lighting Kit directly from the control box without using the remote?
No, the Million Color LED Commercial Lighting Kit cannot be operated directly from the control box. All functions—including color selection, lighting modes and brightness settings—must be controlled using the included wireless remote.
Are LEDGlows lighting kits able to function or be operated without using the included remote, or with a single remote across multiple control boxes?
Most of our LED lighting kits require the included remote for full functionality. While some control boxes have a built-in power or mode button, they offer only basic control options. In some cases, one remote can be paired with two separate control
What are the differences between the Flexible LED Million Color Interior Lights Kit and the Expandable Million Color Pro SMD LED Interior Lights Kit?
The main differences between these two interior lighting kits are tube design, LED type, available configurations, and lighting modes. Flexible LED Million Color Interior Lights Kit:. Available in (6) or (8) 8-inch tube configurations. Each tube cont
How do I keep my Expandable 7 Color Interior Kit on one solid color?
To set your Expandable 7 Color Interior Kit to a solid color, first cycle the kit into the Slow Fade mode using the control button. Once the lights are in Slow Fade mode, press the Pause button when your desired color appears. This will lock the kit
How are the tubes on the Million Color LED Commercial Lighting Kit connected to one another and to the control box?
There are multiple methods that can be used to connect the tubes on the Storefront Lighting Kit depending on your installation needs. Option A: is to connect the tubes using the splitter harness, which allows you to plug up to 4 tubes into a single p
How many LEDs are in each tube of the Million Color LED Storefront Window Lighting Kit?
Each tube in the Million Color LED Storefront Window Lighting Kit contains 30 ultra-bright SMD LEDs, providing strong, even illumination for storefront and display applications. In the standard 4-piece kit, this totals 120 LEDs overall across all fou
Can I cut or shorten the wires between the lighting pods on the Truck Bed Lighting Kit?
No, the wires between the lighting pods should not be cut or shortened. The wiring is designed to maintain proper voltage and reliable connections between each pod and the control system. Modifying the wires can cause performance issues, reduce relia
Can the Truck Bed Lighting Kit be tied into an existing underbody lighting system?
No, the Truck Bed Lighting Kit is designed as a standalone system and cannot be integrated or tied into an existing underbody lighting kit. Each system operates independently with its own dedicated control setup to ensure proper function and reliabil
My Single Color Marine Lighting Kit did not come with a switch—do I need to purchase one separately?
Our Single Color Marine Lighting Kits are designed without an included switch because installation methods can vary depending on the boat’s existing electrical setup. In most cases, boats already come equipped with factory auxiliary 12V switches that
How bright are the Marine Lighting Kits, and can the brightness be adjusted?
Marine Lighting Kits are designed to produce bright, high-output illumination that enhances visibility and adds vibrant accent lighting on boats in both fresh and saltwater environments. The LEDs are engineered for strong light output while maintaini
Can I cut or shorten the wires between the lighting strips on the Tool Box Lighting Kit?
No, the wires between the lighting strips should not be cut or shortened. The wiring is designed to maintain proper voltage and reliable connections between each strip and the control system. Modifying the wires can cause performance issues, reduce r
Can the 2pc Truck Tool Box LED Lights be connected to a vehicle’s existing accessory switch?
Yes, the 2pc Truck Tool Box LED Lights can be wired to an existing accessory switch, provided the switch supplies a compatible 12V power source. This allows you to control the lights using your vehicle’s factory or aftermarket switch for convenient o
Can the Tool Box Lighting Kit be tied into an existing underbody lighting system?
No, the Tool Box Lighting Kit is designed as a standalone system and cannot be integrated or tied into an existing underbody lighting kit. Each system operates independently with its own dedicated control setup to ensure proper function and reliabili
Why are there extra connectors left over after installing my Million Color Slimline Underbody Lighting Kit?
It is completely normal to have unused connectors remaining after installation. The Million Color Slimline Underbody Lighting Kit is designed with a modular, daisy-chain connection system that allows for flexible installation across a wide range of v
Do any underbody lighting kits include an automatic on/off feature?
Yes our Million Color Slimline and Wireless Underbody Lighting Kits for cars and trucks—do offer an optional auto on/off function that can be enabled through the control box settings. Aside from these specific models, the Bluetooth underbody kit focu
What is the difference between the Million Color Wheel Ring Kit and the Million Color Wheel Well Kit?
The main differences between these two kits come down to mounting location and lighting effect:. Million Color Wheel Ring Kit:. Mounts directly behind the brake rotor. Creates a full circular “ring” of light visible through the wheel. Produces a more
Can I control the Wheel Ring Kit with my smartphone?
Smartphone control is available for select Million Color Wheel Ring Kits when used with a compatible Bluetooth-enabled control box. When paired with the smartphone app, you can change colors, adjust brightness, and switch between lighting modes direc
How many LEDs are in each strip of the 2pc Amber LED Truck Running Board Lighting Kit with White Courtesy Lights?
Each strip in the 2pc Amber LED Truck Running Board Lighting Kit with White Courtesy Lights contains a high-output LED layout designed for bright, even illumination across the entire running board area. Depending on the kit size, the LED count per st
Can the 2pc Side Marker & Courtesy LED Lighting Kit be cut to size?
No, the 2pc Side Marker & Courtesy LED Lighting Kit should not be cut or shortened. The strips are pre-engineered with specific LED spacing and internal circuitry designed to operate at their full length. Cutting the strips can damage the circuit, af
What is the length of the power wires included with the 2pc Side Marker & Courtesy LED Lighting Kit?
The 2pc Side Marker & Courtesy LED Lighting Kit includes approximately 9 feet of wiring per strip. This extended wiring is designed to give you enough length to route each strip cleanly along the vehicle’s frame or running board area and connect back
What size slingshot kit is shown in the photos on your website?
The product photos on our website feature the 20-piece kit installed on the Polaris Slingshot. The 20-piece configuration demonstrates a clean, well-balanced lighting layout. It provides strong coverage while maintaining a practical, real-world insta
Do you have Wheel Rings compatible with this Slingshot kit?
Unfortunately, at this time we do not offer any Wheel Rings that are compatible with this Slingshot kit. This kit is designed specifically for its included components and does not currently support a Wheel Ring add-on option. We do not have a Wheel R
Are you able to select which strips turn red when the brakes are applied on the Slingshot kit?
No, the brake function on the Slingshot kit is not customizable by individual strips. When the brake feature is triggered, all configured brake-enabled strips will activate together. The system does not allow selection or isolation of specific strips
Does this Slingshot kit use the LEDGlow Automotive Control app or the LEDGlow Motorcycle Control app?
The Slingshot kit uses the LEDGlow Motorcycle Control app. All Bluetooth control functions, including color selection and lighting modes, are managed through the Motorcycle Control app. This app is designed for powersports applications like the Sling
How many lights do I need for my Slingshot?
The number of lights you need depends on your desired brightness and the areas of your Slingshot you want to illuminate. The base kit is designed to provide a solid lighting setup for most installations. Additional lights can be added if you want inc
Can the TailFlex® light bar be cut to size?
No, the TailFlex® light bar cannot be cut to size. The strip is designed as a sealed, pre-measured unit for proper function and durability. Cutting it would damage the internal wiring and LED circuitry. If a shorter length is needed, a different size
Can I use dielectric grease on the 4-pin connection of the tailgate light bar?
Yes, dielectric grease can be used on the 4-pin connection. It helps protect the connection from moisture, dirt, and corrosion. A small amount is recommended to ensure proper sealing without interfering with the electrical contact. Using dielectric g
When my tailgate light bar is plugged in, my park assist and back-up camera are disabled. How do I fix this?
Some newer vehicles may disable park assist and backup camera functions when the Tailgate Light Bar is plugged into the trailer connector. This happens because the vehicle detects the light bar as a trailer being connected. When this occurs, certain
My spare tire access hole is in the middle of the tailgate light bar mounting area. Can I still access it with the light bar installed?
Yes, but installation will need to be adjusted depending on your setup. If your truck has a spare tire access hole in the mounting area, you can reposition the Tailgate Light Bar so it does not block access. Another option is to install the light bar
How long is the wiring included with each tube in the golf cart lighting kit?
Each tube in the golf cart lighting kit comes with approximately 9 feet of wiring. This length is designed to provide enough reach for standard 4-seater and 6-seater golf cart installations. The wiring allows flexible routing to a central control box
Is there a Million Color wheel well add-on kit available for my Slimline Underbody Kit?
Yes, we do offer Million Color wheel well add-on kits that are designed specifically to pair with Slimline underbody lighting systems. The 4pc Million Color LED Wheel Well Add-On Kit is compatible with Slimline underbody kits and syncs colors and lig
If I purchase a Single Color Wheel Well Kit, can I upgrade the control box later to support multi-color lighting?
No, the Single Color Wheel Well Kit cannot be upgraded to multi-color by changing the control box. The Single Color system uses completely different components than the Million Color lighting kits. Components between Single Color and Million Color sy
Can I combine two wheel well kits to make the lighting brighter?
No, combining two wheel well kits into one system is not supported. Each Wheel Well Lighting Kit control box is designed to power up to 4 lighting tubes only. Adding more tubes than supported will exceed the system’s capacity and may cause performanc
Are wiring extensions included with the Motorcycle & ATV Light Kit?
No, wiring extensions are not included as standard with the Motorcycle & ATV Light Kit. The only kit that comes standard with wiring extensions is the Advanced Million Color Slingshot Lighting Kit. Wiring extensions can be purchased separately in len
What is the largest ATV lighting kit you offer in terms of LED strips?
The largest ATV lighting kit we offer is the 20-piece Advanced Million Color Motorcycle & ATV Lighting Kit. This kit provides the maximum number of LED strips available in a standard ATV setup. If you want more than 20 strips, the system can be expan
Can I upgrade my existing interior kit to a smartphone-controlled kit?
It depends on which interior kit you currently have. The Expandable Million Color Pro SMD LED Interior Kit is eligible for an upgrade to smartphone control. If you have this kit, you can upgrade by purchasing a smartphone-controlled control box. The
Does the Smartphone Interior Kit have an auto-on feature?
Yes, the smartphone-controlled interior kit includes an auto-on feature. When enabled, the kit will automatically turn on and off when the white wire receives power and the red wire is connected to a 12v constant source. This allows the lights to syn
Is the Smartphone Interior Kit compatible with my Smartphone Underbody Kit?
No, the Smartphone Interior Kit and Smartphone Underbody Kit are not compatible with each other. These are two separate systems that use different components and cannot be connected or synced together. If you already have a Smartphone Underbody Kit a
Can I upgrade from the Version 1 Smartphone Underbody Control Box to the Version 2 Control Box?
Yes, the Version 2 Smartphone Control Box is compatible with your existing Version 1 underbody kit. To upgrade, simply remove the Version 1 control box and install the Version 2 control box in its place, following the provided installation instructio
My Bluetooth Motorcycle Kit is asking for a PIN when I try to connect. What is it?
The Smartphone Controlled Motorcycle Kit does not require a PIN to pair. If your device is prompting you for one, it usually means the incorrect app is being used or the kit is not being paired correctly. Please refer to the included pairing instruct
Which interior kits feature Auto Illumination Mode, and how does it work?
All standalone LED interior lighting kits include Auto Illumination Mode. When you connect the kit to a switched 12 V power source (like a door pin, dome light, or headlight circuit), the lights will automatically turn on whenever that source gets po
What are the wire and tube lengths in the Million Color LED Commercial Lighting Kit?
The Million Color LED Storefront Window Commercial Lighting Kit includes acrylic lighting tubes that are 40 inches long. Each tube has 22 inches of wire on both ends for easy mounting and connection, and the included power supply features 9 ½ feet of
Can I wire the Truck Bed Lighting Kit to a vehicle switch, how do I use the included 3‑prong switch, and does it include installation instructions?
Yes — the Truck Bed Lighting Kit can be wired to an existing 12 V accessory switch in your vehicle instead of (or in addition to) using the included 3‑prong switch. The kit comes with its own On/Off switch and full installation instructions showing h
Can I use two Magnetic Switches with my toolbox, and how do I connect or wire the Tool Box Lighting Kit if I don’t use them?
Yes — you can use two Magnetic Switches for a toolbox with multiple doors, one switch per door, to automatically turn the lights on when a door is opened. To connect the Tool Box Lighting Kit to the Magnetic Switch:. Attach the switch to the inside o
Can I add an Underbody kit or extra tubes to my existing LED lighting setup?
Yes — many LEDGlow underbody lighting kits are expandable. You can add additional underbody tubes or other compatible accent lighting to your existing underbody kit as long as the kit’s control box and power capacity support those additions. Optional
Can the 2‑pc Side Marker & Courtesy LED Lighting Kit work with turn signals, running lights, and door activation?
Yes — the kit is versatile:. Turn Signals: The side marker lights can be wired to flash in sync with your vehicle’s turn signals. Running Lights: They can also function as running lights when connected to a 12 V parking or running light circuit. Door
Does the Tailgate Light Bar include reverse lights, and can it sync with my truck’s turn signals and hazard lights?
Yes. The Tailgate Light Bars include integrated reverse (white) lights that activate when your vehicle is put into reverse. They are also designed to sync with your truck’s existing lighting signals, including turn signals and hazard lights, providin
How do I know if a Tailgate Light Bar is compatible with my vehicle, and what size do I need?
Most Tailgate Light Bars are designed with universal fitment and will work on a wide range of trucks and SUVs, especially those equipped with a standard 4-pin trailer wiring connector for plug-and-play installation. To determine compatibility and the
My truck doesn’t have a trailer plug, or it has a 7-pin connector—how do I install a Tailgate Light Bar, and will hardwiring void the warranty?
Tailgate Light Bars are typically designed to plug into a standard 4-pin trailer connector, but alternative installation options are available:. No trailer plug: The light bar can be hardwired directly to your vehicle’s tail light wiring using the in
What patterns and colors are available, and how do I control the 4pc Million Color Golf Cart Expandable Underbody Light Kit?
The kit offers a wide variety of lighting effects, including strobe, flash, fade, gradient, demo, and sound-activated modes, along with the Million Color Cycle. You can also select Solid Color Mode to display one color without cycling, with options l
Are there any patterns or flashing modes available, how long are the wires, and can I add additional tubes to the Single Color Golf Cart Underbody Lights?
Single Color Golf Cart Underbody Light Kit is designed to provide a simple yet versatile lighting solution with multiple built-in effects, flexible wiring for installation, and a fixed 4-piece configuration for consistent underbody coverage. What the
Will the 24” Wheel Well Tubes fit my vehicle with 24” rims, where should they be installed, and can they be mounted to the dust shield or directly to the wheels?
The 24” Wheel Well Tubes are designed to fit a wide range of vehicles, including those with 24” rims; however, proper fitment depends on the available space within the wheel well rather than rim size alone. It is important to ensure there is adequate
How long are the tubes and wires on the Wheel Well Lighting Kits?
All Wheel Well Lighting Kits—both Single Color and Multi Color—include (4) flexible LED tubes that measure 24 inches each, allowing them to fit securely inside your vehicle’s wheel wells. Single Color Wheel Well Lighting Kits include approximately 9
Am I able to control the Wheel Well Lighting Kits with my smartphone, and how are they controlled?
Control options depend on the type of Wheel Well Lighting Kit you have. Multi Color Wheel Well Lighting Kits can be controlled with your smartphone when connected to a Bluetooth-enabled Million Color Underbody Control Box. This allows you to adjust c
What kits are capable of smartphone control, what is the Bluetooth range, and can it be used with a Trike Kit?
Smartphone control is available on Million Color LED kits that include a Bluetooth-enabled control box. This includes compatible motorcycle and trike lighting kits when paired with the appropriate Million Color controller. The Bluetooth range is typi
How do the brake and hazard lights work on the Advanced Million Color Slingshot® Lighting Kit with Smartphone Control?
The brake and hazard light features are built into the control box and can be activated through the app settings. When the brake light feature is properly installed using the blue trigger wire and enabled in the app, all LEDs will illuminate red when
What are the dimensions of the pod lights, can they be added to an existing kit, and how are they controlled?
The pod lights are compact, measuring approximately 1.5 inches in diameter with a .30" profile, and are designed for versatile mounting in a variety of locations on your vehicle. Single Color Pod Lights can be added on to an existing compatible Singl
Which app should I download, and what should I do if my phone won’t pair or re-pair to the Smartphone Controlled Underbody or Motorcycle Kit?
For both the Smartphone Controlled Underbody Kit and Motorcycle Kit, you should download the official LEDGlow Bluetooth control app compatible with the Bluetooth-enabled control box included in your system. This app is required to access color change
Is the display module required for music mode, does the Smartphone Controlled Underbody Kit have sound mode, and what is the display module?
The display module is an optional accessory used with certain LEDGlow lighting systems to enhance functionality and provide additional control features. It acts as an interface that can help manage lighting settings depending on the kit configuration
What does the white wire do, and do the Smartphone Underbody or Interior Kits have an auto-on feature?
The white wire on both Smartphone Controlled Underbody and Interior control boxes is used for the courtesy lighting feature. When connected to your vehicle’s dome light or door pin trigger, it will activate the lights automatically when a door is ope
Can I cut the LED strips on the Advanced Million Color or Advanced Single Color Motorcycle & ATV Lighting Kits?
Yes! The LED strips included with both the Advanced Million Color and Advanced Single Color Motorcycle & ATV Lighting Kits can be trimmed for custom installation needs. Please keep in mind that cutting the strips will break the factory waterproof sea
How thick are the LED strips included with the Advanced Million Color Motorcycle & ATV Lighting Kit?
The LED strips included with the Advanced Million Color Motorcycle & ATV Lighting Kit are approximately 1/8” thick, making them slim enough for a clean and discreet installation on most motorcycles and ATVs.
Can I add more tubes to my existing Million Color LED Commercial Lighting Kit?
Yes! The Million Color LED Commercial Lighting Kit is expandable, allowing you to add additional lighting tubes as needed for larger installations or increased brightness. The system is designed so that one tube connects directly to the control box,
Can the lighting system be controlled through a desktop application, or is it exclusively operated via a mobile app?
No. The lighting system cannot be controlled via a desktop application and does not support Apple CarPlay or Android Auto. It is operated exclusively through the dedicated Bluetooth mobile app for iOS and Android devices.
Can I create and save custom lighting presets using the LEDGlow app?
Yes. The LEDGlow app lets you create and save up to 5 custom lighting presets for quick and easy access.
Is there an adapter to convert my remote-controlled grille light kit to Bluetooth, or is there a Bluetooth version of the grille light kit?
We do not offer a dedicated Bluetooth grille light kit. However, you can upgrade by replacing the control box with our Bluetooth Underbody Control Box, which is compatible with the grille light kit. Bluetooth Underbody Control Box with Smartphone Con
Can I use both the remotes and the app to control the Bluetooth motorcycle lighting kit?
Yes. The Bluetooth motorcycle kit can be controlled using both the smartphone app and the included remotes.
Is the new app compatible with my older Bluetooth control box?
No. Older Bluetooth control boxes with built-in buttons are not compatible with the new app. The previous app version is no longer available, so a new Bluetooth control box is required for compatibility. Bluetooth Controller Upgrade & Compatibility G
Can I control multiple Bluetooth kits with the app, and is there a way to turn the kit on without using the app?
The app connects to one Bluetooth control box at a time, so multiple kits must be controlled separately. Motorcycle Kits: Include key fobs for remote control. Golf Cart and Underbody Kits: Can be turned on using the optional Display Module with Music
What features does the LEDGlow Bluetooth app support, and can I control multiple kits or sync with music?
Motorcycle Kits: Dual-zone control is supported, but music mode is not available.
If I upgrade to a Bluetooth controller, will my existing lights still work by just replacing the controller?
Yes. Your existing lights will continue to work when upgrading to a Bluetooth controller, as long as they are compatible with the new controller.
Can the Auto-On function and Courtesy Light function both work when the white wire is connected?
No, only one function can be used at a time. This is because both features rely on the same white wire input for activation, which cannot support two different signals simultaneously. You must choose either the Auto-On feature or the Courtesy Light f
How do I know which kit I am connected to using the app?
There is no way to identify the kit directly through the app. The only way to confirm a connection is by checking that the green light on the control box is on.
What is the Dual Zone feature on the Motorcycle Lighting Kit and how does it function?
The Dual Zone feature on LEDGlow Motorcycle Lighting Kits allows you to control two separate lighting areas independently from the same control box. For example, you can set one zone (such as the engine area) to one color while the second zone (such
Do you have the pin-out color codes for the LEDGlow Million Color Wheel Rings?
We do not provide pin-out color codes for the Million Color Wheel Rings, as this information is proprietary and subject to constant version changes. Attempting to splice or rewire the kit may result in damage and can void the product warranty. If you
Am I required to use the cigarette lighter adapter, or can the kit be hardwired?
You do not need to use the cigarette lighter adapter. The kit can be hardwired for a more permanent installation.
Can I get an adapter to use LED lights with a lithium battery-powered golf cart?
We do not offer a specific adapter for lithium battery-powered golf carts. A voltage reducer is necessary, and the D5 golf cart harness designed for use with D5 golf carts equipped with a reducer should be used.
Can the cigarette lighter adapter support both the interior and underbody lighting kits simultaneously?
No, the cigarette lighter adapter can only support one lighting kit at a time. It is equipped with a 5-amp fuse and is not designed to power both the interior and underbody kits simultaneously. For dual-kit setups, a direct hardwired connection is re
How can I expand my lighting setup if all ports on the junction cable are in use?
Additional lights cannot be added once all ports on the junction cable are occupied. Golf cart lighting kits are limited to a maximum of 12 lights and are not designed to support further expansion.
How can I tell which wheel well strip is for the left or right side?
The right-side wheel well strip is marked with red heat shrink, while the left-side strip is marked with black heat shrink for easy identification.
What is the power consumption of your lighting systems?
Most lighting kits typically draw around 5 amps of current. Depending on the size and configuration of the kit, power consumption can reach a maximum of 8 to 10 amps.
What is the best way to install lights in the wheel wells of my truck that has felt liners?
There is no officially recommended installation method for wheel wells with felt liners. In some cases, zip ties may be used to secure the lighting tubes, but installation may not be possible depending on the liner material and available mounting poi
What are the dimensions of the Truck Bed Lighting Kit pod?
The pod measures approximately 1.4 inches by 1.4 inches square, with a thickness of about ¼ inch.
Q: How much clearance should be maintained between the LED strips and heat sources?
While there is no specific clearance requirement, the LED strips should be installed far enough from heat sources to avoid direct contact. They must be positioned at a safe distance where the heat will not melt the wiring or damage the lights. As lon
Does the lighting kit draw power when turned off?
When turned off, the lighting kit consumes a minimal amount of standby power to maintain system readiness and Bluetooth connectivity. However, this draw is very low and should not significantly impact your vehicle’s battery.
What is the recommended method for attaching wheel rings if backing plates are not provided?
Attaching wheel rings generally requires backing plates. If these are not provided, you may need to create custom brackets to mount them securely. Without backing plates or proper mounting hardware, it may not be possible to install the wheel rings s
Can the control box designed for 36V golf carts with a built-in voltage reducer be connected through a 12V fuse block?
It depends on the version of the control box. Older control boxes are not compatible with a 12V fuse block and must be connected directly to the power source. Newer control boxes, however, can be safely connected through a 12V fuse block as long as i
What is the function of the blue wire on the Smartphone Controlled Motorcycle Box?
The blue wire is used for the brake light feature. When connected to the motorcycle's brake circuit, it activates the red lighting override, turning the entire kit red whenever the brakes are applied. This enhances visibility and safety during brakin
I lost the instructions for my kit. How can I get a replacement copy?
Instructions for most kits are available online at our Support Center:. https://support.ledglow.com/en-US/articles/product-instructions-202012. If you need help locating the correct instructions, feel free to email us with your kit details, and we’ll
How do I use the remote to control the lights?
To operate your lighting kit with the remote, refer to the specific instructions included with your kit. Functions typically include power on/off, color selection, mode changes (such as strobe, fade, or solid color), and brightness adjustment. If you
What does it indicate if I see a spark when connecting a wire to a voltage reducer or power source?
A small spark may occur when connecting a wire such as a ground wire to a voltage reducer or power source, especially if the circuit is already under load or components are drawing standby power. While a brief spark can be normal, it may also indicat
Is the 12V constant wire required for the turn signals to function on the Resto Series tail lights?
Yes. The 12V constant wire must be connected for the turn signals to operate. If it is not connected, the lights will not flash and the flashers will not function.
Is it safe to run the lights continuously, and can the brightness of solid colors be adjusted?
Yes, the lights can be left on continuously as long as they are properly installed to a stable 12V power source. However, keep in mind that extended use without the engine running may drain the battery. Solid colors can also be dimmed through the inc
How do I know if a relay is required when wiring the brake light feature?
A relay may be needed depending on the vehicle’s wiring setup and the current draw of the brake light feature. If your vehicle’s brake circuit cannot handle the added load or if you want to isolate the lighting kit from the factory wiring, installing
What is the amperage rating for LEDGlow kits?
Most LEDGlow kits draw between 5–10 amps, depending on the number of LED strips installed. Always ensure your power source can safely handle the total amperage to prevent overloads.
How can I enable or disable the canopy lights on my kit?
Your kit is pre-programmed with the canopy function enabled, but you can disable or enable it through the control box or the app (if using a Bluetooth-equipped kit). To Disable the Canopy Lights (Control Box):. Make sure the kit is turned off. Press
Is there a way to make my underglow lights stay on one color instead of cycling through colors?
Yes, LEDGlow underglow kits allow you to set the lights to a solid, single color. Using the remote or app (depending on your kit), simply select your preferred color and leave the kit in solid color mode. Once selected, the lights will remain on that