Why isn’t my LEDGlow light turning on even though the module shows a red light?Updated an hour ago

 A solid or flashing red light on the control module indicates that it is receiving power, but it does not confirm that the LEDs themselves are working. Depending on the kit, a red light may also mean the control box is in pairing mode, power-on standby, or an error state. If the lights are not turning on, check the following:

• Verify that all LED tubes, strips, or pods are securely connected to the control box.

• Inspect the wiring for any cut, pinched, or damaged wires that could cause a short.

• Make sure the inline fuse is intact and not blown.

• Test each light individually by plugging them directly into the control box to rule out a defective section.

• If using a remote, confirm that it is properly programmed to the control box and try reprogramming if needed.

• Check if the kit is in sound mode, which may prevent the lights from staying steadily on. Switch to a solid color mode to confirm.
  
  

If all connections check out and the lights still do not activate, the issue may be with the control box itself. 

For further assistance, feel free to Contact Us.