My Smartphone control box will not pair, and the LED is stuck on red or flashes randomly. What steps should I take?Updated 2 hours ago

Follow these steps to reset and pair your Smartphone control box:

1. Ensure Bluetooth is enabled on your device.

2. For Android users, make sure location services are enabled.

3. Confirm your device software is up to date.

4. Close the app if it is currently open.

5. To fully disconnect power from the control box, remove the inline fuse from the red power wire for at least 15 seconds.

6. Reconnect power to the control box. The LED will briefly turn red, then Amber, indicating the box is ready to pair.

7. Open the correct app for your kit (Car, Bike, or Golf Cart).

8. The kit should automatically pair, and the LED will turn green, indicating it is ready for use.
   
   

If the issue persists:

• Repeat the process above.

• If it still does not work, contact our support team for assistance.